Due to popular demand we are proud to offer an Adirondack Chair that is specifically designed as per our customer's requests.

Our customers wanted an Adirondack chair that was

• stronger than the traditional softwood Adirondack Chair to resist more denting so we made ours with a durable hardwood comparable to teak
• they wanted the screws to be hidden so we drilled long holes from underneath the seat, from the backside of the back, and underneath the arms so that the hardware does not mar the finished beauty of the Adirondack chair
• they wanted to be able to have these Adirondack chairs painted white so we found a hardwood that was not only comparable to teak but unlike teak it could be painted!
• they wanted a white paint that wouldn't turn yellow over time so we tested and researched different finishes until we found the perfect white paint with Becker Acroma. The Becker Acroma system never turns yellow!

It took years of research and development to finally create the perfect Adirondack chair. Here are just a few more of the reasons why our Adirondack chair is different from the rest:

• Folding adirondack chair for easier storage
• The back is gently curved to support your spine while eliminating pressure points without being curved too much which would cause your shoulders to hunch forward straining your spine – in other words it's a perfect fit!
• The seat is gently curved to support your body weight without undue pressure to your tailbone or thighs which can cause your legs and feet to painfully fall asleep. Our adirondack chair is ergonomically designed to supports you without pressure points!
• The seat front curves down instead of a hard edge so there are NO pressure points behind the knees that cause painful leg cramps and pins and needles in the feet.
• The original adirondack chair was designed so that the seat sat level if you put it on a hill, the problem was if you put it on level ground the seat was nearly impossible to get out of because of the extreme incline. Our adirondack chairs have been modified so that you can gently recline on level ground giving you the benefit of lounging while making it possible so you can get out of the chair when you need to.
• All screws and bolts are inserted from the back and underside – this means is, no screws showing on Top to lessen the beauty of these chairs.
• Because all the screws are either under the chair or imbedded behind the chair they are not exposed directly to the elements meaning that the yellow zinc galvanized hardware will last even longer .
• Because there are no screws on the surface the wood finish is not compromised which helps to keep the finish lasting longer .
• The widest part of the back is bevelled like glass so that the finish doesn't get damaged when folding and unfolding the chair.
• The back is not only braced with a solid wood brace but under the brace is a metal brace to give additional support to the structure and to minimize wobbling which is common in folding chairs of this nature.
• This adirondack chair is heavier than most traditional Adirondack chairs – this is due to the more dense hardwood over the light density of soft wood. The additional weight is an added bonus on decks where high winds can move or flip furniture.
• Our adirondack chair is NOT pressure treated – meaning no toxic chemicals have been added to preserve the wood, the Shorea hardwood is naturally resistant and thus does not require preservatives.

This adirondack chair is solidly constructed of Shorea hardwood . Shorea (also called Philippine mahogany because of its density and color) shares similar characteristics of teak including being both a naturally rot resistant and insect resistant hardwood.

Shorea however is the perfect hardwood in that although it shares many similar characteristics with teak it has one very distinct advantage – Shorea can be painted! And best of all our Shorea hardwood is FSC certified meaning it is a natural renewable resource specifically grown for lumber (preserving both old growth forests & wildlife).

Each piece of Shorea hardwood is kiln dried, cut, sanded, and then goes through an extensive painting and assembly process. We prime each piece using Becker Acroma primer making sure the coat goes on with no bubbles, no blisters, no scratches, no peel, no overrunning at the edges and no surface roughness. Once dry each piece is then sanded to a very fine finish (240 grit abrasive) then cleaned and a beautiful white topcoat of White Becker Acroma is applied.

The hardware we use for this chair is weather resistant yellow zinc plated hardware . Once completed every piece is carefully inspected for quality and then well packed for damage free shipping.

Please note that due to the size of this adirondack chair it is shipped partially assembled with easy to follow assembly instructions that take approximately 30 minutes to complete. We do provide an Allen key for assembly but you will still need your own Philip screwdriver to complete the assembly.

This beautiful adirondack chair is available with a matching ottoman and end table for that perfect outdoor patio furniture set making it ideal for entertaining guests or just relaxing with a special loved one.